Explainer

SASB vs conduit CMBS, seen from the issuer's desk

SASB CMBS vs conduit CMBS from the lender and issuer side: pool makeup, rating methods, risk retention under Regulation RR, loan documents and servicing.

Updated November 15, 2026 · 11 min read · By
Flat editorial illustration of one tall tower on a pedestal beside many small buildings feeding through funnels into one shared pipe

The short answer

SASB CMBS and conduit CMBS are both commercial mortgage-backed securities. A SASB (single asset, single borrower) deal securitizes one large loan, secured by one property or by a cross-collateralized portfolio owned by one borrower or a related group. A conduit deal pools many loans to many borrowers, contributed by several originators under standardized underwriting. The bonds look similar. The credit, the documents and the people in control do not.

From the lender's and issuer's side, the differences that matter are concrete. Rating agencies use separate methodologies for concentrated and diversified pools. Risk retention under Regulation RR applies to both, but the retained piece and its holder differ. A SASB loan is negotiated as a bespoke loan agreement with its own cash management, while conduit loans follow each originator's program and a common set of representations. Servicing runs under a trust and servicing agreement for one loan versus a pooling and servicing agreement for dozens. Two filed deals, COMM 2024-277P and WFCM 2026-C66, show each side.

What is SASB CMBS?

SASB stands for single asset, single borrower. The CREFC glossary defines SASB CMBS as the securitization of a single, usually very large, loan collateralized by a single property or by a group of cross-collateralized, cross-defaulted properties owned by the same borrower or a related group of borrowers. In ESG reporting the same letters refer to the Sustainability Accounting Standards Board, which has nothing to do with CMBS.

COMM 2024-277P is a filed example. Its borrower is 277 Park Avenue, LLC, and the collateral is an office building of about 1.88 million square feet at 277 Park Avenue in New York. The whole loan is $750 million: $520 million of senior notes and a $230 million subordinate B note, fixed at 7.01% and interest only to an anticipated repayment date (ARD) of August 6, 2029, with a stated maturity of August 6, 2032. The SASB trust holds senior Notes A-1 and A-7 ($420 million) and the B note. Other senior notes went elsewhere, including $70 million into the BBCMS 2024-5C29 conduit. The trust and servicing agreement lists the Class A, X, B and C certificates as Rule 144A global certificates, sold to qualified institutional buyers rather than through a registered prospectus.

What is a conduit loan and a conduit CMBS?

A conduit loan is a commercial mortgage originated to be sold into a multi-borrower securitization. CREFC's glossary describes the conduit as the link between the originating lenders and the ultimate investors: it makes or buys loans under standardized underwriting parameters and, once enough volume has accumulated, pools them for sale to CMBS investors. KBRA's methodology refers to most such deals as conduit fusion transactions.

WFCM 2026-C66 is a filed example. Its prospectus describes 29 fixed-rate loans secured by 49 commercial and multifamily properties, with a cut-off balance of approximately $586.35 million. Wells Fargo Bank contributed 10 loans (35.8% of the pool) and Societe Generale seven (20.4%), with JPMorgan Chase, Citi Real Estate Funding, UBS, BSPRT, Bank of Montreal and others contributing the rest. Its ten largest loans make up 67.0% of the pool. The offered certificates were sold under a registered prospectus filed on Form 424B2.

WFCM 2026-C66 mortgage pool by property type (prospectus, Form 424B2, March 30, 2026)
Property typePropertiesShare of pool
Retail720.2%
Office419.7%
Self storage2618.5%
Multifamily713.1%
Hospitality19.9%
Leased fee19.4%
Industrial26.9%
Mixed use12.3%

How do SASB and conduit deals compare?

The general CMBS mechanics, from defeasance to lockboxes, are in what borrowers should know about CMBS loans. This table stays on structure, using the two filed deals.

COMM 2024-277P (SASB) and WFCM 2026-C66 (conduit), from their filed agreements and prospectuses
FeatureCOMM 2024-277P (SASB)WFCM 2026-C66 (conduit)
CollateralOne loan on one office property29 loans on 49 properties across eight property types
Loan sellersOne (GACC, the retaining sponsor)Multiple sponsors and mortgage loan sellers
Rating methodology typeSingle asset or concentrated pool criteriaMulti-borrower criteria
Offering formRule 144A certificatesRegistered offering, prospectus on Form 424B2
Risk retentionClass HRR held by a third-party purchaserClasses E-RR to H-RR (eligible horizontal residual interest), about 5.03% of fair value, held by two third-party purchasers
Controlling classClass HRR only; if it falls below 25% there is no controlling classMost junior of Classes E-RR to H-RR with at least 25% of its original balance; Class H-RR at closing
Servicing agreementTrust and servicing agreement for one whole loanPooling and servicing agreement for the pool
ServicersKeyBank as master servicer and special servicerTrimont as master servicer, LNR Partners as special servicer
Workout and liquidation fee0.50%1.00%, with a $25,000 minimum

How do rating agencies rate each structure?

Rating agencies split the two on purpose. KBRA's North American CMBS Single Borrower and Large Loan Rating Methodology covers deals made up of a single asset or single borrower, or a small pool that lacks diversity relative to loan count or borrower. Pools that do show that diversity, such as most conduit fusion deals, go under its North American CMBS Multi-Borrower Rating Methodology, which lists a concentration adjustment among its sections. Morningstar DBRS keeps a separate North American Single-Asset/Single-Borrower Ratings Methodology, in a version dated February 28, 2025.

The two methodologies are built differently. The table of contents of KBRA's single borrower methodology starts from loan-level ratable proceeds and a tranching template, with adjustments for asset quality, amortization and loan-level diversity. Its multi-borrower methodology works through probability of default, loss given default and a base credit enhancement before a concentration adjustment. In 2026-C66 the senior classes carry 30.000% initial credit support, Class A-S 22.375%, Class B 17.125% and Class C 13.000%. For 277 Park Avenue, the BBCMS 2024-5C29 prospectus reports whole loan metrics, including the B note, of a 1.89x underwritten NCF DSCR, a 42.7% loan to value and a 13.5% underwritten NOI debt yield, on an appraised value that assumes leasing reserves were funded at origination. Lenders testing a large loan against those measures can run the numbers in the debt yield calculator.

How does risk retention work for SASB and conduit deals?

The same federal rule covers both. Regulation RR, codified for the SEC at 17 CFR part 246 and for the OCC at 12 CFR part 43, requires the sponsor to retain either an eligible vertical interest of at least 5%, an eligible horizontal residual interest equal to at least 5% of the fair value of all ABS interests, or a combination adding up to five (17 CFR 246.4).

Section 246.7 adds a CMBS-only option: up to two third-party purchasers can buy the horizontal piece instead of the sponsor. Each must pay cash at closing, without financing from transaction parties, and must independently review the credit risk of every loan before the bonds are sold. The deal must appoint an operating advisor. An initial third-party purchaser may transfer the interest to a qualifying successor only after five years. Both example deals use this route. WFCM 2026-C66 discloses CMBS 4 Sub 14, LLC and TH Holdco 1 (Cayman), L.P. holding Classes E-RR to H-RR for Wells Fargo Bank as retaining sponsor. COMM 2024-277P names PCSD PR Cap V L Private Limited as the third-party purchaser of Class HRR, with GACC as retaining sponsor.

The difference is what the retained holder is underwriting. In a conduit, the horizontal buyer reviews dozens of loans, and in 2026-C66 the same classes are the control eligible classes for the whole pool. In a SASB deal it holds a single bet on one building. Qualifying CRE loans under 246.17 can reduce the requirement, but the tests are strict: an LTV of 65% or less (CLTV 70%) in the base case; a DSCR of at least 1.5x for a qualifying leased CRE loan, 1.25x for qualifying multifamily and 1.7x for other CRE loans; and, under 246.17(a)(6), all loan payments based on level monthly payments of principal and interest that fully amortize the debt over no more than 25 years (30 for multifamily), over a term of at least ten years. An interest-only loan such as 277 Park Avenue, with a stated maturity eight years after its note date, meets neither the amortization test nor the ten-year minimum maturity in 246.17(a)(7). The 2026-C66 prospectus reports 0.0% of its pool as qualifying CRE loans and a required retention of 5.0%.

How do the loan documents differ?

A SASB loan is papered as a single negotiated credit. The 277 Park Avenue loan has a hard lockbox with in-place cash management: tenants pay into a lender-controlled clearing account swept daily, and during a trigger period, including a DSCR below 1.20x for two consecutive quarters, excess cash is held as additional collateral up to one year of debt service. Its notes are split into senior and subordinate pieces governed by a co-lender agreement, and the senior pari passu notes are spread across several securitizations.

Conduit loans follow each originator's program, and the pool is held together by the mortgage loan purchase agreements and a common set of representations and warranties. The 2026-C66 prospectus carries the representations in Annex D-1 and the exceptions in Annex D-2, and discloses loans made as exceptions to underwriting guidelines. For the full set of documents a closing produces, the loan documentation guide is the reference. Both structures require loans sold into a REMIC securitization to stay qualified mortgages, which is why the PSA definitions refer back to the tax code.

How does prepayment work in each?

Conduit pools standardize call protection. The 2026-C66 prospectus says every loan in the pool has some voluntary prepayment protection through defeasance or lockout provisions and/or yield maintenance, and that voluntary prepayments generally require a yield maintenance charge or prepayment premium except in an open period of approximately 4 to 7 months up to the stated maturity date. Casualty and condemnation prepayments generally carry no yield maintenance charge unless an event of default is continuing. The defeasance entry and defeasance vs yield maintenance explain the mechanics.

In a SASB deal the prepayment terms are whatever the single loan agreement says, and the bonds price off them directly. The BBCMS 2024-5C29 prospectus shows 277 Park Avenue with a lockout of 25 payments, defeasance for 31 and an open period of four. If the loan is not repaid at the ARD, the rate steps up to the greater of 9.51% and the five-year Treasury yield plus 527 basis points, and most excess cash flow goes to paying down principal. Because one borrower's decision moves the whole deal, SASB investors read one loan's prepayment and extension terms the way conduit investors read a pool's prepayment profile.

How is servicing different?

A SASB trust and servicing agreement serves one whole loan, so its definitions are narrower. In COMM 2024-277P a specially serviced loan is the whole loan, and the controlling class is Class HRR or nobody: if HRR falls below 25% of its original balance, no other class steps up. The conduit PSA instead moves control down a stack of control eligible classes as appraisal reductions erode them.

Large loans connect the two worlds. A conduit that holds a pari passu note in a SASB loan does not service it. The 2026-C66 and BBCMS 2024-5C29 prospectuses call these non-serviced mortgage loans, serviced under the lead deal's agreement. In BBCMS 2024-5C29, the 277 Park Avenue notes are serviced by KeyBank under the COMM 2024-277P agreement, and the conduit's own directing certificateholder generally has consultation rights only, to the extent the co-lender agreement provides. The fee gap is real too: the SASB deal pays 0.50% workout and liquidation fees, against 1.00% in the conduit. The special servicer post walks through those terms.

Which structure fits which loan?

From a lender's desk the choice is mostly made by the asset. A loan on a stabilized property of ordinary size goes to a conduit program, where it is one of dozens and the originator's standardized underwriting is what investors buy. A trophy asset, or a portfolio held by one sponsor, can support its own SASB deal, where investors underwrite that asset directly and the loan terms are negotiated to match. Very large loans often do both at once: 277 Park Avenue sits partly in a SASB trust and partly in conduit pools.

The diligence load follows the structure. A SASB deal puts one asset's full record in front of rating agencies, B-piece and third-party purchasers, and bond investors, often through a deal data room. The Prodeal vs Datasite comparison sets a sale-process data room beside a lending workspace, which is the same split between the investor-facing room and the closing file. The broader CMBS glossary entry has the market terms.

Questions lenders ask

What are the differences between CMBS and SASB?
SASB is a type of CMBS. All CMBS are bonds backed by commercial mortgage loans. A SASB deal is backed by one loan on one property or one borrower's portfolio; a conduit CMBS is backed by many loans to many borrowers. Ratings, risk retention holders, documents and servicing all follow from that difference.
What does SASB stand for in finance?
In commercial real estate finance, single asset, single borrower: a securitization of one large loan. In corporate ESG reporting, SASB refers to the Sustainability Accounting Standards Board. The two are unrelated.
What is a conduit loan?
A commercial mortgage originated under standardized underwriting to be sold into a multi-borrower CMBS pool. Several originators contribute loans to one conduit deal, and each loan is sold with representations and warranties under a mortgage loan purchase agreement.
Are SASB deals publicly registered?
Many are not. The COMM 2024-277P trust and servicing agreement lists its Class A, X, B and C certificates as Rule 144A global certificates for qualified institutional buyers. Conduits such as WFCM 2026-C66 sell offered classes under a registered prospectus filed on EDGAR.
Does risk retention apply to SASB CMBS?
Yes. Regulation RR applies to both structures. COMM 2024-277P satisfied it through a third-party purchaser of the Class HRR certificates under 17 CFR 246.7, the same route WFCM 2026-C66 used with Classes E-RR to H-RR.
Can one large loan sit in several CMBS deals?
Yes. Large loans are split into pari passu notes. BBCMS 2024-5C29 held $70 million of 277 Park Avenue senior notes while COMM 2024-277P held the controlling B note and other senior notes. The conduit's piece is serviced under the SASB agreement.
Who controls a SASB deal after default?
In COMM 2024-277P, the directing holder appointed by more than 50% of the Class HRR certificates, as long as that class keeps at least 25% of its original balance after appraisal reductions. Below that, the TSA provides that there is no controlling class and no other class steps up.
Patrick H. Janson, Prodeal
Written by
· Prodeal

Patrick Janson leads enterprise sales and solution strategy at Prodeal. He served as Prodeal's Chief Operating Officer from 2017 to 2022 and returned in 2024 following his time as a Product Lead in Hines' Innovation Group. He brings more than 15 years of experience in commercial real estate finance and technology, having started his career in commercial real estate lending at Emerald Creek Capital. Patrick serves on the Mortgage Bankers Association's Technology Advisory Council, is a former Chairman of the Young Mortgage Bankers Association, and has been a guest speaker at Cornell and Columbia Universities.

Keep reading
Ready when you are

See your deals in real time.

Send us one live deal. We will build the room on your own checklist.